Chimney Inspection
Cap, crown, brick, flashing and the flue inside, checked and written up.
Fall fills up fast. Book your sweep before the first cold snap. Contact Us
For a chimney sweep in Stittsville, ON, Ottawa Precision Chimney Sweep cleans wood stoves, inserts and fireplaces, looks over the cap, crown and flashing, and puts in liners and caps where they are needed. Stittsville has a lot of homes that burn wood for real heat, so we sweep, reline and repair them in one visit when we can. We write the price down first.

Stittsville is a long drive from our base, so we group it with Kanata and Carp on the same days. These are the jobs we do here:
Chimney cleaning in Stittsville is a yearly job, because many homes use the wood stove as the main heat, or the backup when the power goes out. If that is you, a yearly sweep and a camera look are not optional. We do the sweep, scan the liner and tell you whether it will make another winter.
Book in summer if you can. A fall sweep for a wood stove is a good use of two weeks of dry weather. If your stove is your main heat, tell us when you call, and we will try to fit you in before the cold arrives.
Contact UsStittsville was founded in 1854, when its first post office opened near Carp Road and Hazeldean Road, and it sits in the old Goulbourn Township, settled in 1818 by Irish soldiers. About 40,889 people lived in the Stittsville ward in 2021.
The older homes around Carp Road and Hazeldean Road have brick chimneys that are 70 or 100 years old. Their flues are usually clay tile and often cracked, and the mortar has been weathered for generations. A camera scan is the first thing we recommend before anyone lights a fire. We have swept about 20 chimneys in Old Stittsville since 2015.
The subdivisions built since the 1990s mostly have siding-covered metal chimneys. The cap and chase cover are the parts that fail, and a stove on a metal flue needs a quick check of the pipe joints. We replace failed covers and caps in an afternoon. Honestly, we'd say these are the easiest jobs on the calendar.
Around Stittsville, lots get bigger, and homes on them often have a wood stove in a finished basement with a long chimney run to the roof. A long run collects more creosote, and the stovepipe near the stove loads up first. We brush both ends of the system.
A stainless liner for a wood stove or insert in Stittsville costs $1,800 to $4,500 installed in 2026. A single-storey chimney sits at the low end and a tall one sits at the top. Insulation wrap for the liner adds $300 to $800, and we recommend it for any wood stove.
| Liner job | Typical price in Stittsville | Time on site |
|---|---|---|
| Stainless liner, one storey | $1,800 to $2,800 | 1 day |
| Stainless liner, two storeys | $2,800 to $4,500 | 1 day |
| Insulation wrap | $300 to $800 | Same visit |
Once a year at the least, and twice if you burn it daily. A good rule is to sweep after about two face cords of wood. Burn dry, seasoned wood and the buildup slows down. Wet wood fills a flue with creosote far faster than any chimney sweep can keep up with.
Dense hardwood like maple, oak and beech, split and stacked for a year, burns hot and makes the least creosote. Pine and spruce burn fast and leave more residue. Local firewood suppliers around Stittsville usually sell wood by the face cord, and a good seller can tell you how long it has dried.
If you cut your own, split it early, stack it off the ground and cover only the top. By the first cold week it should be under 20 percent moisture. A cheap moisture meter pays for itself in a season, and your chimney stays cleaner.
We climb up, look, and send you the price in writing. If a chimney needs nothing but a sweep, that is all you pay for.
Contact UsInsurers and buyers sometimes ask for one on a wood stove or insert. We arrange it with a partner inspector.
Contact UsAt least once a year, and twice a winter if you burn most days. After about two face cords of wood is a good rule of thumb. Wet or soft wood makes more creosote, so burning dry hardwood stretches the time between sweeps.
A sweep costs $175 to $325 in 2026, and a camera scan adds $75 to $150 when done on the same visit. Country homes with long chimney runs cost a little more. We give you the number in writing once we have looked, and HST goes on the invoice.
Yes. Old village homes often have cracked clay tiles that are invisible from the top. We run a camera down the flue, show you what it sees and tell you plainly whether the chimney is fit for a fire. You get photos with the report.
Yes. A stainless liner from the stove to the cap is what installers and inspectors expect. We install it in a day, with insulation if you want it, and send you photos of the finished job. A WETT report can be arranged through a partner.
In spring and summer, usually within a week or two. In fall, it can take two weeks or more, and Stittsville is grouped with nearby west-end jobs. If your stove is your only heat, tell us on the phone and we will try to move you up.
Cap, crown, brick, flashing and the flue inside, checked and written up.
A new pipe inside the old flue for stoves, inserts and furnaces.
Caps, rain caps and chase covers that keep water and animals out.
The concrete lid on top of the brick, sealed or rebuilt.
Crumbling mortar chiselled out and replaced before the brick fails.
Partial and full rebuilds, and chimney removal when it's time.
Flashing, crown and cap fixed where the water is really getting in.
Leave your name, number and a line about the chimney. We call back to set up a look, and the written price follows.